Bambu Lab H2S: Specs, What's New and Who It's For
Reader-supported: we may earn a commission when you buy through our links. Affiliate disclosure
The Bambu Lab H2S is Bambu's big single-nozzle printer: a 340 x 320 x 340 mm build volume, a chamber actively heated to 65 °C and a 350 °C nozzle for engineering materials, plus optional laser and cutting modules. It is a workshop machine. If you mainly print PLA and PETG at desk scale, the smaller P2S covers most of the same ground.
Best for
Large single-piece prints, engineering filaments such as ABS, ASA and nylon, and makers who want laser engraving in the same machine
Skip if
First-time buyers, small desks, or anyone who mostly prints small PLA models
The largest print space in Bambu's lineup in an enclosed, heated machine, with a single nozzle and the option to add a 10 W laser and a cutting module.
What is new about the H2S
Bambu launched the H2S in 2025 as a single-nozzle sibling to the dual-nozzle H2D. Bambu's own announcement calls it its ultimate single-nozzle printer, and the headline is space: 340 x 320 x 340 mm, which one retailer puts at about 10% more volume than the H2D. Industry coverage at launch reported the base machine shipping from October, with AMS and laser combos available from Bambu's store.
The other big change from the P-series is heat. The chamber is actively heated to 65 °C and the hotend reaches 350 °C, according to Bambu's blog and wiki. A warm, closed chamber is what lets ABS, ASA and nylon print large without warping and cracking between layers.
| Spec | Bambu Lab H2S |
|---|---|
| Build volume | 340 x 320 x 340 mm |
| Frame | Enclosed CoreXY, actively heated chamber (65 °C) |
| Max nozzle temperature | 350 °C |
| Max print speed (maker) | 1000 mm/s |
| Multi-colour | With AMS 2 Pro (Combo) |
| Laser and cutting | Optional 10 W laser / cutting modules |
Laser, cutting and multi-colour
The base H2S is a printer only. The Laser Full Combo adds a 10 W laser and a cutting module, the AMS 2 Pro, and an emergency stop button that the other versions do not have. Coverage of the launch also mentions flame sensors and a key switch for laser use. If you would never engrave or cut, the base or AMS Combo is the version to consider.
For colour, the H2S works with the AMS 2 Pro. Bambu's wiki says it supports up to four AMS 2 Pro and eight AMS HT units, 24 filament slots in total. The first-generation AMS also works, but without the AMS drying function.
Where to buy it
When we checked, the H2S was sold through Bambu Lab's own store and specialist retailers, not on Amazon. The link on this page goes straight to Bambu's US store and earns us nothing.
If you would rather buy on Amazon, the closest Bambu option there is the P2S Combo: also enclosed, with the AMS 2 Pro included, but a smaller 256 mm cube and no actively heated chamber or laser.
| Spec | Bambu Lab H2S | Bambu Lab P2S Combo |
|---|---|---|
| Build volume | 340 x 320 x 340 mm | 256 x 256 x 256 mm |
| Frame | Enclosed CoreXY, actively heated chamber (65 °C) | Enclosed CoreXY (no active chamber heating) |
| Multi-colour | With AMS 2 Pro (Combo) | AMS 2 Pro included (4 spools) |
Before you commit
- Space. Bambu's FAQ asks for at least 10 cm between the printer and a wall, on top of its own footprint.
- Your materials. The heated chamber is the reason to choose the H2S. If you print mostly PLA and PETG, much of that capability goes unused.
- The size jump. Large prints take hours and use a lot of filament. Owners upgrading from desk-size printers should expect longer queues, not just bigger parts.
New to 3D printing? Start with our guide to low-cost first printers or the complete guide; the H2S makes most sense as a second printer.
Questions people ask
Which Bambu Lab 3D printer is the best?
There is no single best. The A1 mini and A1 suit beginners, the P2S is the enclosed all-rounder, and the H2S is for large prints and engineering materials. The H2D adds a second nozzle.
How to use the Bambu Lab H2S?
Like other Bambu printers, it is set up through the Bambu Handy app or Bambu Studio on a computer, with the slicer sending prints over the network. Laser and cutting jobs need the Laser Full Combo modules.
Where our numbers come from
- This page draws on 7 sources, from maker spec sheets to independent reviews; the main ones are listed below.
- Specs are each maker's own published figures; where makers and retailers disagree, we use the maker's.
- Rankings are calculated from our side-by-side comparison of 15 printers, so they change as we add models.
- Owner topics are counted from 82 public threads on Bambu Lab's community forum.
- Facts on this page were last checked on 2026-11-15.
Sources
- Bambu Lab blog: H2S, the ultimate single-nozzle 3D printer
- Bambu Lab wiki: H2S FAQ
- 3D Printing Industry: Bambu Lab launches the H2S
- CGMagazine: Bambu Lab H2S review
- Bambu Lab wiki: P2S FAQ