Skip to content
LayerWorthy

Bambu Lab P2S Firmware 01.03.00.00: What Changed

By The LayerWorthy Spec DeskVerified

Reader-supported: we may earn a commission when you buy through our links. Affiliate disclosure

Quick answer

Bambu Lab released firmware 01.03.00.00 for the P2S on 2026-09-21. It adds support for the E3D High-Flow Integrated Hotend, raises travel speed to 1000 mm/s, adds Z-axis motor noise cancellation and speeds up time-lapse loading in Bambu Handy. Two of the changes need Bambu Studio 2.8.3.66 or later.

What changed

The P2S firmware release history lists these changes for 01.03.00.00:

  • "Added support for the E3D High-Flow Integrated Hotend. Requires Bambu Studio v2.8.3.66 or later."
  • "Added Z-axis motor noise cancellation."
  • "Increased travel speed to 1000 mm/s for shorter print times. Requires Bambu Studio v2.8.3.66 or later."
  • "Improved loading speed for time-lapse videos, reducing wait time when reviewing footage in Bambu Handy. Requires Bambu Handy v4.0.0 or later."
  • "Added quick access to Terms of Use, Privacy Policy, and the User Experience Improvement Program in the Settings menu."

What it means for owners

Two items depend on software outside the printer: the high-flow hotend support and the faster travel speed both need Bambu Studio 2.8.3.66 or later, and the faster time-lapse loading needs Bambu Handy 4.0.0 or later. Updating the printer alone will not unlock them. Travel speed is the speed of non-printing moves, so the maker's claim of shorter print times is about how quickly the head repositions, not about how fast it lays down plastic.

The Z-axis noise cancellation is a quality-of-life change for anyone who runs the printer in a shared room, and the Settings shortcuts are legal housekeeping.

How to update

Check the minimum versions above first, then follow Bambu's usual firmware update process for the P2S. The full history, including earlier versions, is on the P2S firmware release history page.

Known issues

No known issues are listed on this entry. Bambu does not mark 01.03.00.00 as a beta.

Where it fits

The printer is in our catalogue as the Bambu Lab P2S, and the P2S guide covers who it suits. Support like this, with new hardware options arriving by firmware, is part of what separates active platforms from stagnant ones. Our comparison lists it next to its rivals.

Questions people ask

Which software do I need for the new travel speed?

Bambu says the 1000 mm/s travel speed requires Bambu Studio v2.8.3.66 or later.

Does this firmware work with third-party hotends?

The notes mention support for the E3D High-Flow Integrated Hotend, which also requires Bambu Studio v2.8.3.66 or later. They do not describe other hotends.

Where our numbers come from

  • This page draws on 1 sources, from maker spec sheets to independent reviews; the main ones are listed below.
  • Facts on this page were last checked on 2026-11-16.

Sources

  1. Bambu Lab Wiki: P2S firmware release history