Skip to content
LayerWorthy

Bambu Lab A1 and A1 Mini Firmware 01.09.00.00: What Changed

By The LayerWorthy Spec DeskVerified

Reader-supported: we may earn a commission when you buy through our links. Affiliate disclosure

Quick answer

Bambu Lab released firmware 01.09.00.00 for the A1 and A1 mini on 2026-11-09. It adds security updates, stops calibration from starting during a normal print, and fixes a screen freeze, an external filament loading failure and a power-loss recovery issue. Bambu lists no known issues, with one update requirement for older firmware.

What changed

Bambu's firmware release history for the A1 and A1 mini lists these changes for 01.09.00.00 (the same version and notes apply to both printers), in the maker's own words:

  • Security Enhancements: "Included necessary security updates."
  • Calibration During Printing: "Calibration can no longer be started during a normal print."
  • Screen Response: "Fixed an issue where the screen would occasionally become unresponsive during printing while the print job continued to run."
  • External Filament Loading: "Fixed an issue where the feeding process failed when a print was initiated after the device restarted with external filament already loaded."
  • Power-loss Recovery: "Optimized power-loss recovery to resolve an occasional unresponsive job issue after a power interruption and restart during printing."
  • Network Status Reporting: when connected to Farm Manager, the printer reports the signal strength, channel and latency of its current access point for central monitoring.

What it means for owners

Most of this is housekeeping that you notice only when it was a problem for you. The two fixes that touch a print in progress are the screen freeze and the power-loss recovery change, and both address a printer that kept running a job while it stopped responding. The calibration change removes a way to start a calibration in the middle of a normal print, which in our reading makes an accidental disruption less likely.

The security line is generic, and Bambu does not describe it further, so the practical advice is the usual one: install security updates when they are offered. The network reporting item matters mainly if you run several printers through Farm Manager. A single-printer home setup will not notice it. Bambu also notes that this release removes the legacy local task-queue sync that was tied to Farm Manager 3.0.0.

How to update

Bambu's release history lists one requirement for offline updates, in its own words: "If the printer firmware is below 01.08.01.00, offline-upgrade to 01.08.01.00 before offline-upgrading to any higher version." If your printer is already on 01.08.01.00 or later, that step does not apply. The full notes live on Bambu's release history pages for the A1 and the A1 mini.

Known issues

Bambu lists no known issues for 01.09.00.00. The previous release carries one: when upgrading from version 01.04.00.00 or earlier to 01.08.01.00 by offline update, Bambu says garbled text or characters may appear, which is one more reason to follow the stepped update path above.

Where it fits

Both printers are in our catalogue: the Bambu Lab A1 mini and the Bambu Lab A1. If you are comparing them, our printer comparison puts the figures side by side, and the A1 mini guide covers who it suits. Firmware notes like these are the kind of ongoing support detail that is worth weighing when you choose a maker.

Questions people ask

Is firmware 01.09.00.00 a beta?

Bambu's release history does not mark it as a beta.

Do the A1 and A1 mini share the same firmware version?

Yes. Bambu publishes the same version number and notes for both printers.

Where our numbers come from

  • This page draws on 2 sources, from maker spec sheets to independent reviews; the main ones are listed below.
  • Facts on this page were last checked on 2026-11-16.

Sources

  1. Bambu Lab Wiki: A1 firmware release history
  2. Bambu Lab Wiki: A1 mini firmware release history

Keep comparing